Operation, Process & Maintenance
Instrumentation & Control Systems
1. Introduction to Oil Field Surface Facilities Operations
Covers basic oil and gas production equipment and mechanical systems, including function and control.
2. Process Measurements & Control Valves
Introduces industrial measurement principles, control valves, and process optimization.
3. Introduction to Distributed Control Systems (DCS)
Provides an overview of DCS functions, architecture, and integration into process operations.
4. Introduction to Process Safety Systems
Covers process safety fundamentals, safety instrumented systems, and risk assessment techniques.
5. Introduction to Control Systems
Explains the role of control systems in industrial automation and process optimization.
6. Instrument Calibration & Verification
Covers calibration procedures, verification techniques, and accuracy standards for industrial instruments.
7. Applied Electronics for Instrumentation
Introduces electronic components and their application in process control.
8. Programmable Logic Controller (PLC) Fundamentals
Covers PLC architecture, programming, and troubleshooting for industrial automation.
9. Supervisory Control and Data Acquisition (SCADA) Systems
Teaches remote monitoring, real-time control, and communication protocols in SCADA systems.
10. Instrument Fieldbus Control Systems
Covers modern fieldbus communication protocols, integration, and troubleshooting.
11. Process Analyzers & Continuous Monitoring
Provides an overview of process analyzers and their role in real-time process control.
12. Final Control Elements & Actuators
Covers types, functions, and troubleshooting of control elements like valves and actuators.
13. Hydraulic Control Panel Operation
Teaches hydraulic control panel operation and maintenance for wellhead control systems.
14. Advanced Process Control & Loop Tuning
Covers advanced control strategies, tuning techniques, and optimization of control loops.
15. Advanced Distributed Control Systems (DCS)
Covers DCS programming, alarm management, and advanced process monitoring.
16. Safety Instrumented Systems (SIS) & SIL Certification
Covers safety integrity levels (SIL), safety instrumented functions (SIF), and SIS
17. Hazardous Areas Classification & Installation
Provides knowledge on hazardous area classifications, equipment selection, and safety compliance.
Mechanical & Rotating Equipment
1. Introduction to Oil Field Surface Facilities Operations
Covers fundamental mechanical maintenance principles and diagnostic techniques.
2. Centrifugal & Positive Displacement Pumps
Covers pump types, operating principles, maintenance, and troubleshooting.
3. Valve Maintenance & Repair
Provides knowledge on valve selection, installation, and repair techniques.
4. Heat Exchangers: Operation & Maintenance
Covers types, operation, efficiency improvement, and troubleshooting techniques.
5. Plant Piping & Fittings
Covers industrial piping systems, materials, fittings, and maintenance practices.
6. Centrifugal Compressors: Operation & Maintenance
Covers performance optimization, troubleshooting, and maintenance of centrifugal compressors.
7. Positive Displacement Compressors
Covers operation, maintenance, and troubleshooting of reciprocating and screw compressors.
8. Turbines (Gas & Steam) Operation & Maintenance
Covers operation, efficiency improvement, and maintenance of gas and steam turbines.
9. Pressure Vessels: Design & Inspection
Covers construction, operation, safety inspections, and regulatory compliance.
10. Pipeline Operations & Integrity Management
Covers pipeline safety, monitoring, pigging, and integrity management techniques.
11. Machinery Diagnostics & Root Cause Analysis
Covers vibration analysis, failure modes, and diagnostic techniques for rotating equipment.
12. Plant Turnaround & Shutdown Management
Covers planning, execution, and safety procedures for plant shutdowns and turnarounds.
13. Corrosion Control & Monitoring
Covers corrosion prevention techniques, material selection, and integrity management.
Electrical & Power Systems
1. Electrical Safety & Grounding Systems
Covers grounding systems, electrical safety procedures, and hazard mitigation.
2. Lighting & Small Power Systems
Covers industrial lighting, power distribution, and hazardous area certifications.
3. Low Voltage Distribution Systems
Covers components, safety, and maintenance of LV electrical systems.
4. Uninterruptible Power Supplies (UPS) & Battery Banks
Covers UPS operation, maintenance, and emergency power systems.
5. High Voltage Distribution Systems
Covers HV electrical systems, switchgear, and protective relays.
6. Electrical Protection Systems & Equipment
Covers protection systems for transformers, generators, and switchgear.
7. Electrical Motors, MCC & Drives
Covers motor types, control techniques, and troubleshooting in industrial applications.
8. Power Quality & Management
Covers power disturbances, load balancing, and industrial power optimization.
9. Power Generation & Distribution Systems
Covers cogeneration, gas turbines, and electrical power infrastructure in oil & gas.
10. Electrical Fault Finding & Troubleshooting
Covers systematic troubleshooting of industrial electrical systems.
11. Electrical Authorization & Compliance
Covers electrical safety procedures, regulations, and operational compliance.
Process Engineering & Production Operations
1. Introduction to Oil & Gas Processing
Covers crude oil processing, separation, and gas treatment fundamentals.
2. Gas Lift Systems: Design & Optimization
Covers artificial lift techniques and gas lift system optimization.
3. Production & Test Separation Systems
Covers oil, gas, and water separation techniques and separator maintenance.
4. Flare Systems & Pressure Relief Operations
Covers flare design, operation, safety, and environmental considerations.
5. Oil Stabilization & Gas Sweetening
Covers crude oil stabilization, gas sweetening techniques, and safety considerations.
6. Crude Oil Storage & Export Operations
Covers crude oil storage, transportation, and metering systems.
7. Water, Oil & Gas Sampling & Analysis
Covers sampling techniques, laboratory analysis, and contamination prevention.
8. Pigging Operations & Pipeline Integrity
Covers pipeline cleaning, inspection, and maintenance techniques.
9. Water Treatment & Injection Systems
Covers water purification, injection, and reservoir pressure maintenance.
10. Gas Compression & Dehydration Systems
Covers compression and dehydration processes for natural gas treatment.
11. Chemical Injection & Treatment Systems
Covers industrial chemical treatment techniques, corrosion prevention, and scale removal.
12. Surface & Subsea Wellhead Systems
Covers wellhead control, equipment, and subsea production systems.
13. Control Room Operations & Process Optimization
Covers process control, real-time monitoring, and emergency response procedures.
Utilities & Support Systems
1. HVAC Systems: Operation & Maintenance
Covers industrial HVAC system operation, maintenance, and air quality management.
2. Steam & Condensate Systems
Covers steam generation, condensate recovery, and boiler operation.
3. Cooling Water Systems
Covers industrial cooling water system design, operation, and maintenance.
4. Fire & Gas Detection Systems
Covers fire detection, gas monitoring, and emergency response systems.
5. Fire Water Systems & Emergency Preparedness
Covers fire water supply, firefighting systems, and emergency response planning.
6. Potable Water & Sewage Treatment Systems
Covers potable water treatment, sewage disposal, and environmental compliance.
7. Instrument, Utility Air & Nitrogen Systems
Covers air and nitrogen supply systems, compressors, and maintenance.
8. Drain Systems & Environmental Protection
Covers industrial drainage systems, environmental impact, and compliance.
9. Cathodic Protection & Corrosion Prevention
Covers cathodic protection techniques, monitoring, and pipeline integrity.