Course catalogue
The full catalogue
Every course we run, grouped by discipline. Search by title or keyword, or open a discipline to browse it. Any course can be adapted to your site, your equipment and your standards.
Operation, Process & Maintenance63 courses
Instrumentation & Control Systems17
Introduction to Oil Field Surface Facilities Operations
Covers basic oil and gas production equipment and mechanical systems, including function and control.
Process Measurements & Control Valves
Introduces industrial measurement principles, control valves, and process optimization.
Introduction to Distributed Control Systems (DCS)
Provides an overview of DCS functions, architecture, and integration into process operations.
Introduction to Process Safety Systems
Covers process safety fundamentals, safety instrumented systems, and risk assessment techniques.
Introduction to Control Systems
Explains the role of control systems in industrial automation and process optimization.
Instrument Calibration & Verification
Covers calibration procedures, verification techniques, and accuracy standards for industrial instruments.
Applied Electronics for Instrumentation
Introduces electronic components and their application in process control.
Programmable Logic Controller (PLC) Fundamentals
Covers PLC architecture, programming, and troubleshooting for industrial automation.
Supervisory Control and Data Acquisition (SCADA) Systems
Teaches remote monitoring, real-time control, and communication protocols in SCADA systems.
Instrument Fieldbus Control Systems
Covers modern fieldbus communication protocols, integration, and troubleshooting.
Process Analyzers & Continuous Monitoring
Provides an overview of process analyzers and their role in real-time process control.
Final Control Elements & Actuators
Covers types, functions, and troubleshooting of control elements like valves and actuators.
Hydraulic Control Panel Operation
Teaches hydraulic control panel operation and maintenance for wellhead control systems.
Advanced Process Control & Loop Tuning
Covers advanced control strategies, tuning techniques, and optimization of control loops.
Advanced Distributed Control Systems (DCS)
Covers DCS programming, alarm management, and advanced process monitoring.
Safety Instrumented Systems (SIS) & SIL Certification
Covers safety integrity levels (SIL), safety instrumented functions (SIF), and safety instrumented systems.
Hazardous Areas Classification & Installation
Provides knowledge on hazardous area classifications, equipment selection, and safety compliance.
Mechanical & Rotating Equipment13
Introduction to Oil Field Surface Facilities Operations
Covers fundamental mechanical maintenance principles and diagnostic techniques.
Centrifugal & Positive Displacement Pumps
Covers pump types, operating principles, maintenance, and troubleshooting.
Valve Maintenance & Repair
Provides knowledge on valve selection, installation, and repair techniques.
Heat Exchangers: Operation & Maintenance
Covers types, operation, efficiency improvement, and troubleshooting techniques.
Plant Piping & Fittings
Covers industrial piping systems, materials, fittings, and maintenance practices.
Centrifugal Compressors: Operation & Maintenance
Covers performance optimization, troubleshooting, and maintenance of centrifugal compressors.
Positive Displacement Compressors
Covers operation, maintenance, and troubleshooting of reciprocating and screw compressors.
Turbines (Gas & Steam) Operation & Maintenance
Covers operation, efficiency improvement, and maintenance of gas and steam turbines.
Pressure Vessels: Design & Inspection
Covers construction, operation, safety inspections, and regulatory compliance.
Pipeline Operations & Integrity Management
Covers pipeline safety, monitoring, pigging, and integrity management techniques.
Machinery Diagnostics & Root Cause Analysis
Covers vibration analysis, failure modes, and diagnostic techniques for rotating equipment.
Plant Turnaround & Shutdown Management
Covers planning, execution, and safety procedures for plant shutdowns and turnarounds.
Corrosion Control & Monitoring
Covers corrosion prevention techniques, material selection, and integrity management.
Electrical & Power Systems11
Electrical Safety & Grounding Systems
Covers grounding systems, electrical safety procedures, and hazard mitigation.
Lighting & Small Power Systems
Covers industrial lighting, power distribution, and hazardous area certifications.
Low Voltage Distribution Systems
Covers components, safety, and maintenance of LV electrical systems.
Uninterruptible Power Supplies (UPS) & Battery Banks
Covers UPS operation, maintenance, and emergency power systems.
High Voltage Distribution Systems
Covers HV electrical systems, switchgear, and protective relays.
Electrical Protection Systems & Equipment
Covers protection systems for transformers, generators, and switchgear.
Electrical Motors, MCC & Drives
Covers motor types, control techniques, and troubleshooting in industrial applications.
Power Quality & Management
Covers power disturbances, load balancing, and industrial power optimization.
Power Generation & Distribution Systems
Covers cogeneration, gas turbines, and electrical power infrastructure in oil & gas.
Electrical Fault Finding & Troubleshooting
Covers systematic troubleshooting of industrial electrical systems.
Electrical Authorization & Compliance
Covers electrical safety procedures, regulations, and operational compliance.
Process Engineering & Production Operations13
Introduction to Oil & Gas Processing
Covers crude oil processing, separation, and gas treatment fundamentals.
Gas Lift Systems: Design & Optimization
Covers artificial lift techniques and gas lift system optimization.
Production & Test Separation Systems
Covers oil, gas, and water separation techniques and separator maintenance.
Flare Systems & Pressure Relief Operations
Covers flare design, operation, safety, and environmental considerations.
Oil Stabilization & Gas Sweetening
Covers crude oil stabilization, gas sweetening techniques, and safety considerations.
Crude Oil Storage & Export Operations
Covers crude oil storage, transportation, and metering systems.
Water, Oil & Gas Sampling & Analysis
Covers sampling techniques, laboratory analysis, and contamination prevention.
Pigging Operations & Pipeline Integrity
Covers pipeline cleaning, inspection, and maintenance techniques.
Water Treatment & Injection Systems
Covers water purification, injection, and reservoir pressure maintenance.
Gas Compression & Dehydration Systems
Covers compression and dehydration processes for natural gas treatment.
Chemical Injection & Treatment Systems
Covers industrial chemical treatment techniques, corrosion prevention, and scale removal.
Surface & Subsea Wellhead Systems
Covers wellhead control, equipment, and subsea production systems.
Control Room Operations & Process Optimization
Covers process control, real-time monitoring, and emergency response procedures.
Utilities & Support Systems9
HVAC Systems: Operation & Maintenance
Covers industrial HVAC system operation, maintenance, and air quality management.
Steam & Condensate Systems
Covers steam generation, condensate recovery, and boiler operation.
Cooling Water Systems
Covers industrial cooling water system design, operation, and maintenance.
Fire & Gas Detection Systems
Covers fire detection, gas monitoring, and emergency response systems.
Fire Water Systems & Emergency Preparedness
Covers fire water supply, firefighting systems, and emergency response planning.
Potable Water & Sewage Treatment Systems
Covers potable water treatment, sewage disposal, and environmental compliance.
Instrument, Utility Air & Nitrogen Systems
Covers air and nitrogen supply systems, compressors, and maintenance.
Drain Systems & Environmental Protection
Covers industrial drainage systems, environmental impact, and compliance.
Cathodic Protection & Corrosion Prevention
Covers cathodic protection techniques, monitoring, and pipeline integrity.
Surface Facilities30 courses
Surface Facilities and Operations3
Surface Facility Production Operations
This course introduces fundamental principles of oil and gas production, from wellhead to custody transfer. Participants will learn about separation, treatment, transportation, and measurement of hydrocarbons, along with equipment operation and process optimization.
Offshore Facilities Design and Operations
Designed for engineers and field personnel, this course covers technologies and processes for offshore production facilities. Topics include topside and subsea equipment, installation, and operation for shallow, deep, and ultra-deepwater developments.
Piping and Pipeline Design, Maintenance, and Operation
A comprehensive program covering pipeline design, pressure drop calculations, material selection, corrosion management, pigging, integrity analysis, and predictive maintenance to optimize pipeline performance.
Hydrocarbon Transportation and Processing3
Crude Oil Pumping and Gas Compression Systems
Provides a thorough understanding of pumps and compressors used in oilfield operations, focusing on design, selection, operation, and performance evaluation under different field conditions.
Gas Compression and Transportation
Covers natural gas compression and transport, focusing on system design, data evaluation, equipment selection, and process simulation for operational efficiency.
The Pipeline Transportation of Produced Hydrocarbons
An in-depth study of pipeline transportation challenges, covering flow assurance, pressure loss calculations, heavy oil transport, and chemical/mechanical optimization techniques.
Flow Assurance and Production Chemistry3
Hydrocarbon Properties and Behavior
Explores fundamental petroleum properties, phase behavior, viscosity, and interfacial tension to improve production and transportation processes.
Introduction to Flow Assurance
Focuses on flow impediments such as asphaltenes, wax, hydrates, and emulsions, along with prevention, control, and remediation methods.
Assuring Flow from Pore to Process
A holistic approach to flow assurance, integrating phase behavior, flow dynamics, and production chemistry for offshore and onshore environments.
Fluid Processing and Treatment3
Oil Processing and Conditioning
Covers oil treatment from wellhead to market, including separation, dehydration, desalting, and fluid processing technologies.
Gas Processing and Conditioning
Provides knowledge on gas separation, dehydration, sweetening, measuring, and transportation, focusing on plant and equipment design.
Crude Oil and Water Treatment
Explores emulsions, desalting, produced water treatment, and environmental compliance in oilfield operations.
Corrosion and Asset Integrity3
Corrosion Monitoring and Inspection
Covers types of corrosion, monitoring techniques, inspection methods, and data interpretation for oil and gas facilities.
Oilfield Corrosion Management
Provides practical solutions for controlling and mitigating corrosion in pipelines, production systems, and processing facilities.
Advanced Corrosion Management and Material Selection
Focuses on corrosion-resistant materials, inhibitors, coatings, and integrity management strategies for long-term asset protection.
Instrumentation, Control, and Reliability3
Instrumentation and Control Basics
Introduces measurement principles, sensors, control valves, and field data acquisition systems used in surface facilities.
Automation, Instrumentation, and Process Control
Covers automation technologies, process control systems, and real-time monitoring for optimizing oil and gas operations.
Reliability Engineering and Failure Mode Analysis (FMEA)
Provides tools for risk assessment, failure prediction, and reliability-centered maintenance strategies.
Health, Safety, and Environmental (HSE) Engineering3
Introduction to HAZOP and Process Hazard Analysis (PHA)
Teaches fundamental risk assessment techniques, including HAZOP, "What-If" analysis, and checklist methodologies.
HAZOP/HAZID and Safety Integrity Level (SIL) Analysis
Covers advanced safety studies, process hazard identification, and layer of protection analysis in petroleum operations.
Emergency System and Electrical Components in Oil & Gas Facilities
Explores emergency power systems, electrical fault analysis, and maintenance strategies for UPS and battery backups.
Maintenance and Asset Management3
Maintenance and Reliability Fundamentals
Provides an overview of maintenance strategies, predictive techniques, and reliability-centered maintenance concepts.
Condition-Based Maintenance for Static and Rotating Equipment
Focuses on predictive maintenance techniques, vibration analysis, thermal imaging, and diagnostics for critical equipment.
Plant Turnaround and Shutdown Management
Equips professionals with strategies for planning and executing major plant shutdowns while ensuring safety and cost efficiency.
Water Management in Oil & Gas3
Applied Water Technology in Oil and Gas Production
Explores produced water treatment, water injection, and disposal systems for onshore and offshore operations.
Water Management Aspects of Shale Plays
Covers hydraulic fracturing water usage, treatment technologies, regulatory frameworks, and best management practices.
Advanced Water Treatment and Chemical Management
Discusses innovative treatment solutions, environmental compliance, and chemical optimization for oilfield water management.
Specialized Topics in Process Engineering3
Process Simulation and Optimization
Provides hands-on training in process modeling and optimization using industry-standard simulation software.
Heat Exchanger Selection and Design
Covers the principles of heat transfer, exchanger design, troubleshooting, and efficiency improvement.
Fractionation and Gas Processing Plant Troubleshooting
Provides expertise in fractionation tower design, gas plant operations, and troubleshooting common processing challenges.
Production & Completion Engineering35 courses
Fundamentals of Production & Completion Engineering4
Introduction to Production Engineering
This course covers fundamental production engineering concepts, including reservoir fundamentals, well completion impact on production, and common well intervention techniques. Participants will develop essential skills to facilitate discussions with industry professionals.
Fundamentals of Well Completions
Participants will learn the basics of well completion engineering, including completion selection, equipment functions, and stress analysis in tubulars. The course provides hands-on exercises for a thorough understanding of completion processes.
Understanding Common Well Intervention Techniques
This course prepares participants for well intervention operations, covering fundamental techniques to address well productivity and integrity challenges.
Fundamentals of Slickline Operations
Provides theoretical and practical exposure to slickline equipment and operations. Participants will engage in hands-on training in wellsite and workshop environments.
Well Completion and Workovers4
Introduction to Well Completions and Interventions
An extensive course covering well completion and intervention operations, planning, and monitoring. Participants gain an overview of well design and execution.
Completion and Workovers
Covers the planning and execution of workover operations to maintain and increase production. Participants will explore safety regulations, procedures, and equipment selection.
Completion Fluids for Well Supervisors
Participants will be introduced to completion fluids, density control, filtration, and environmental concerns, ensuring safe and efficient completion operations.
Advanced Well Integrity – Cement Placement Evaluation
This course focuses on assessing cement integrity for well integrity assurance. Participants will learn how to evaluate cement logs and their impact on well integrity.
Artificial Lift and Well Optimization5
Artificial Lift Technology
Covers fundamental artificial lift methods, including rod pumps, progressive cavity pumps, gas lift, and electrical submersible pumps. Best practices for field production optimization are included.
Progressive Cavity Pumps – Application Engineering
Focuses on the application of progressing cavity pumps (PCP) for heavy oil production. Participants will explore design, optimization, and troubleshooting of PCP systems.
Gas Lift Design, Diagnosis, and Optimization
Provides a comprehensive understanding of continuous and intermittent gas lift operations, system design, troubleshooting, and production optimization techniques.
Electric Submersible Pumps – Practical Training
A hands-on course on ESP applications, covering special conditions such as high-temperature wells, high-viscosity fluids, and gassy wells.
Advanced Gas Lift Design & Troubleshooting
Covers advanced gas lift design, well unloading techniques, and troubleshooting challenges for efficient production operations.
Well Stimulation and Reservoir Enhancement4
Acidizing and Fracturing Techniques
This course introduces well stimulation techniques, including acidizing and hydraulic fracturing. It covers design methodologies and quality control processes.
Formation Damage: Causes, Prevention & Remediation
Explores formation damage mechanisms, prevention techniques, and remediation strategies, ensuring sustained production performance.
Hydraulic Fracture Treatment Design and Quality Control
Covers hydraulic fracturing methodologies, execution planning, quality control, and fracture evaluation, with hands-on exercises.
Matrix Stimulation in Carbonates
Provides an in-depth understanding of matrix acidizing, treatment design, and candidate selection in carbonate formations.
Production Data Analysis and Optimization3
Introduction to Reservoir Engineering and Nodal Analysis
This course introduces reservoir engineering concepts, covering rock and fluid properties, inflow and outflow performance, and nodal analysis.
Production Data Analysis – Shale Gas, Tight Gas, and Coal-Bed Methane
Participants will learn production data analysis techniques, decline curve analysis, and well testing for unconventional reservoirs.
Advanced Production Data Analysis and Nodal Analysis
This course covers predictive modeling, identifying production bottlenecks, and optimizing well performance using nodal analysis.
Well Testing and Logging3
Fundamentals of Well Testing Operations
Provides an overview of well testing operations, including equipment handling, data acquisition, and safety procedures.
Production Logging Tools & Modern Well Logging
Participants will learn to analyze production logs, evaluate fluid movement, and diagnose well performance issues.
Advanced Well Testing Operations
Covers advanced techniques in well testing, job planning, execution, and data interpretation for production optimization.
Coiled Tubing and Rigless Intervention3
Introduction to Coiled Tubing Operations
Covers coiled tubing equipment, applications, and operations, including nitrogen-based interventions.
Coiled Tubing Applications and Troubleshooting
Participants will learn design methodologies, contingency planning, and troubleshooting techniques in coiled tubing operations.
Rigless Intervention: Slickline, Coiled Tubing, Workover & Emerging Technologies
This course explores rigless well intervention techniques, including coiled tubing, slickline, and emerging well servicing technologies.
Sand Control and Well Integrity3
Sand Control Methods and Applications
Covers techniques for sand control, including gravel packing, frac-pack, and screenless completions.
Workovers and Well Integrity Enhancement
Focuses on workover operations aimed at restoring well integrity and enhancing production.
Advanced Well Productivity and Enhancement
A detailed course on optimizing well performance through artificial lift, stimulation, and completion design.
Specialized Topics in Shale Plays3
Unconventional Resources – Completion and Stimulation
Covers completion techniques and hydraulic fracturing strategies for shale reservoirs.
Completions and Stimulation Aspects of Shale Plays
Provides an in-depth understanding of well completions and stimulation techniques tailored for unconventional plays.
Production Engineering Aspects of Shale Plays
Focuses on production optimization strategies for shale reservoirs, including reservoir management and data analytics.
Water and Environmental Management3
Oilfield Water Management
Participants will explore water handling strategies, produced water treatment, and injection/disposal techniques.
Water Management Aspects of Shale Plays
This course covers water sourcing, treatment, and disposal strategies for shale gas operations.
Advanced Environmental Management for Production Operations
Focuses on environmental regulations, waste management, and sustainable practices in oil and gas production.
Drilling Engineering31 courses
Fundamentals of Drilling Engineering4
Introduction to Drilling Engineering
This course introduces participants to drilling terminology, concepts, and equipment. It covers the full well design process, enabling participants to initiate well planning and understand drilling operations.
Drilling Principles and Practices
Participants will gain an understanding of drilling processes, rig components, and equipment functions. The course covers drilling techniques, safety considerations, and operational best practices.
Basic Drilling Fluid Technology
Explores drilling fluid properties, functions, and classifications. Participants will learn about water-based, oil-based, and synthetic mud systems, along with their applications.
Casing and Cementing Design
Provides knowledge of casing and tubing selection, cementing practices, and material properties. The course includes API standards, cement slurry design, and cementing operations.
Well Control and Integrity4
Basic Well Control
Introduces primary and secondary well control techniques, formation pressure concepts, wellbore stability, and industry standards for well control operations.
Stuck Pipe and Fishing Operations
Covers stuck pipe prevention, early warning signs, fishing tool selection, and sidetracking techniques. Participants will engage in case studies for practical learning.
Well Integrity – Life of a Well
Focuses on well integrity management, covering barrier verification, risk assessment, and regulatory compliance throughout the well lifecycle.
Managed Pressure Drilling (MPD) & Underbalanced Drilling
Provides a deep dive into MPD and UBD principles, equipment, and operational techniques. Participants will learn about pressure management strategies to enhance safety and efficiency.
Directional and Horizontal Drilling4
Fundamentals of Directional & Horizontal Drilling
Covers directional well planning, well trajectory control, and surveying techniques. Participants will learn about steering tools and wellbore positioning.
MWD and LWD Tool Physics Applications
Explores Measurement While Drilling (MWD) and Logging While Drilling (LWD) principles, focusing on downhole data acquisition and real-time formation evaluation.
Geomechanics for Drilling Engineers
Provides an in-depth understanding of stress analysis, pore pressure prediction, and wellbore stability. Participants will apply geomechanics in drilling operations.
Extended Reach and Multilateral Drilling
This course covers the design and execution of complex well trajectories, including extended reach and multilateral wells, ensuring optimal well placement and reservoir drainage.
Offshore and Deepwater Drilling3
Introduction to Offshore Drilling and Completion Operations
Provides an overview of offshore drilling rigs, dynamic positioning, mooring operations, and safety regulations in offshore environments.
Deepwater Drilling Design and Operations
Focuses on well design, equipment selection, and operational challenges in deepwater environments. Participants will explore BOP systems, wellhead designs, and station-keeping methods.
Deepwater Well Project and Risk Management
Covers project planning, risk assessment, and execution strategies for deepwater drilling. Participants will gain insights into safety, environmental considerations, and cost management.
Drilling Optimization and Risk Management4
Drilling Fluids and Hydraulics
Teaches the fundamentals of drilling fluid systems, including fluid properties, rheology, and hole cleaning techniques for efficient drilling.
Drill Bits and Hydraulics
Participants will learn drill bit selection, performance optimization, and hydraulics calculations to improve penetration rates and minimize drilling costs.
Drilling Optimization Techniques
Focuses on drilling performance analysis, real-time monitoring, and optimization strategies for reducing non-productive time and improving well efficiency.
Drilling Project and Risk Management
Participants will learn about project planning, contract models, HSEQ management, and risk mitigation techniques to optimize drilling operations.
Casing, Cementing, and Well Construction3
Fundamentals of Cementing Operations
Introduces cementing principles, slurry design, and placement techniques for primary and remedial cementing.
Practical Cementing Operations
Covers cementing execution, mud removal, centralization, and cement evaluation methods, including case studies and laboratory analysis.
Cement Integrity Assurance and Evaluation
Focuses on cement sheath evaluation, log interpretation, and remedial cementing techniques for ensuring long-term well integrity.
Well Abandonment and Decommissioning3
Well Plug and Abandonment Strategies
Covers regulatory requirements, barrier placement, and plug design for safely abandoning wells while minimizing environmental impact.
Deepwater Well Abandonment and Decommissioning
Provides knowledge on well decommissioning techniques in deepwater environments, including mechanical and cement plug setting, casing removal, and site remediation.
Advanced Well Integrity for Decommissioning
Focuses on risk management, regulatory compliance, and best practices for ensuring well integrity throughout the decommissioning process.
Well Logging and Formation Evaluation3
Mud Logging Operations
Covers mud logging principles, gas detection, cuttings analysis, and wellsite data acquisition techniques.
Modern Production Logging Techniques
Provides hands-on training in wellbore imaging, downhole flow diagnostics, and real-time data analysis.
Advanced Reservoir Mapping and Geosteering
Teaches real-time well placement, geosteering techniques, and advanced resistivity tools for optimizing reservoir contact.
Specialized Drilling Technologies3
Underbalanced and Managed Pressure Drilling Techniques
Introduces MPD and UBD principles, equipment, and applications for controlling downhole pressure.
HPHT Drilling Design and Operations
Focuses on high-pressure, high-temperature (HPHT) drilling challenges, including well design, equipment selection, and operational safety.
Dynamic Pressure Drilling (DPD) Technologies
Covers emerging drilling technologies such as dual-gradient drilling, foam drilling, and continuous circulation methods for optimizing well control and performance.
Reservoir Engineering24 courses
Fundamentals of Reservoir Engineering3
Introduction to Reservoir Engineering
Covers the role of reservoir engineers, rock and fluid properties, Darcy’s Law, reservoir drive mechanisms, material balance, decline curve analysis, and reservoir lifecycle management.
Core Analysis and Rock Properties
Introduces core sampling, porosity, permeability, capillary pressure, and wettability to assess reservoir properties and hydrocarbon storage capacity.
Fluid Properties and PVT Modeling
Teaches Pressure-Volume-Temperature (PVT) analysis, phase behavior, EOS tuning, and laboratory correlations to characterize reservoir fluids.
Reservoir Characterization and Modeling3
Applied Reservoir Engineering
Focuses on material balance equations, well performance analysis, and decline curve methods for reservoir evaluation.
Reservoir Characterization: A Multi-Disciplinary Approach
Explores geological, petrophysical, and geostatistical methods for building accurate reservoir models.
Integrated Reservoir Modeling
Covers the workflow for static and dynamic modeling, integrating geological, well log, seismic, and production data for reservoir simulation.
Reservoir Performance and Production Forecasting3
Decline Curve Analysis and Diagnostic Methods
Introduces production forecasting techniques, decline curve analysis, and performance diagnostics for conventional and unconventional reservoirs.
Well Test Design and Analysis
Focuses on pressure transient analysis, buildup, drawdown, and interference tests for reservoir characterization.
History Matching and Reservoir Optimization
Covers assisted and automatic history matching techniques, sensitivity analysis, and uncertainty quantification in reservoir modeling.
Gas Reservoir Engineering3
Fundamentals of Gas Reservoir Engineering
Explores gas properties, material balance, and deliverability analysis for conventional and tight gas reservoirs.
Advanced Gas Reservoir Management
Covers gas well testing, nodal analysis, and multi-phase flow modeling in gas fields.
Simulation of Naturally Fractured Gas Reservoirs
Teaches modeling of dual-porosity, dual-permeability reservoirs, pressure transient analysis, and gas-condensate behavior.
Enhanced Oil Recovery (EOR) and Waterflooding3
Waterflooding Fundamentals and Design
Introduces water injection patterns, displacement efficiency, and performance prediction methods.
Enhanced Oil Recovery: Chemical, Miscible, and Thermal Methods
Covers polymer flooding, CO₂ injection, steam flooding, and hybrid EOR processes with case studies.
Advanced Water Injection Design & Application
Focuses on injection well performance, water treatment, compatibility issues, and simulation techniques.
Unconventional Reservoir Engineering3
Reservoir Engineering for Unconventional Resources
Covers shale gas, tight gas, and coal-bed methane reservoir characteristics, production mechanisms, and challenges.
Reservoir Management for Unconventional Reservoirs
Teaches decline curve analysis, hydraulic fracturing optimization, and production enhancement techniques.
Production Data Analysis for Shale Gas and Tight Gas
Focuses on data-driven analytics, machine learning applications, and forecasting unconventional reservoir performance.
Reservoir Simulation and Data Analytics3
Fundamentals of Reservoir Simulation
Provides an introduction to numerical simulation concepts, grid models, and flow equations.
Applied History Matching in Reservoir Simulation
Covers conventional and assisted history matching techniques, optimizing reservoir performance predictions.
Statistical Modeling and Data Analytics for Reservoir Engineers
Teaches machine learning applications, uncertainty quantification, and predictive modeling in reservoir engineering.
Specialized Reservoir Topics3
Naturally Fractured Reservoirs: Characterization and Management
Covers fracture identification, dual-porosity modeling, and enhanced recovery techniques.
Water Management in Reservoir Engineering
Focuses on produced water handling, reinjection strategies, and reservoir sustainability.
Reservoir Stimulation and Formation Damage Prevention
Explores acidizing, hydraulic fracturing, and formation damage mitigation techniques.
Pipeline Engineering12 courses
Fundamentals of Pipeline Engineering3
Introduction to Pipeline Design and Operation
Covers fundamental pipeline engineering principles, including pipeline types, flow regimes, material selection, pressure considerations, and operational safety.
Onshore Pipeline Facilities – Design, Construction, and Operations
Provides a comprehensive understanding of onshore pipeline infrastructure, including design standards, construction techniques, and operational challenges.
Offshore Pipeline Design and Construction
Explores offshore pipeline routing, material selection, subsea installation techniques, and environmental considerations.
Pipeline Transportation and Flow Assurance3
Pipeline Transportation and Storage Facilities
Covers pipeline transportation methods, storage facility design, and integrity management for hydrocarbon transport.
The Pipeline Transportation of Produced Hydrocarbons
Focuses on crude oil, natural gas, and multiphase transportation challenges, including pressure loss calculations and optimization techniques.
Flow Assurance for Oil and Gas Production Systems
Addresses key flow assurance challenges, including wax deposition, hydrate formation, emulsion control, and pipeline pigging strategies.
Pipeline Simulation and Multiphase Flow3
Pipeline Simulation and Performance Optimization
Teaches simulation techniques for pipeline flow modeling, pressure drop analysis, and transient behavior assessment.
Pipeline and Gathering Systems: Theory and Applications
Focuses on gathering network design, multiphase flow behavior, and system optimization for enhanced pipeline performance.
Multiphase Flow in Pipelines
Provides in-depth knowledge of gas-liquid flow, slugging effects, and phase separation techniques to improve transportation efficiency.
Pipeline Maintenance, Integrity, and Pumping Systems3
Pipeline Integrity Management and Risk Assessment
Introduces pipeline risk analysis, inspection methods, and corrosion prevention strategies for long-term asset reliability.
Pump Technology and Pipeline Operations
Covers pump selection, operation, and maintenance for pipeline transportation systems, including centrifugal and positive displacement pumps.
Advanced Pipeline Monitoring and Leak Detection
Teaches real-time monitoring technologies, pipeline surveillance, and emergency response strategies for leak prevention.
Welding5 courses
Welding Training Courses5
Introduction to Welding Technology in Oil & Gas
Provides an overview of welding techniques, materials, and equipment used in oil and gas pipelines, refineries, and offshore structures.
Welding Metallurgy for Oil & Gas Applications
Covers fundamental metallurgical principles, including heat treatment, alloy behavior, and weldability of common oil and gas materials.
Pipeline Welding and Inspection Standards
Focuses on welding processes, defects, inspection methods, and compliance with industry standards such as API, ASME, and ISO.
Advanced Welding Processes for High-Pressure Systems
Explores specialized welding techniques such as TIG, MIG, and submerged arc welding for high-pressure pipelines and vessels.
Corrosion and Welding Failures: Prevention & Control
Teaches corrosion mechanisms, failure analysis, and welding strategies to enhance durability in harsh environments.
Laboratory5 courses
Laboratory Training Courses5
Introduction to Laboratory Testing in Oil & Gas
Covers fundamental laboratory procedures, equipment handling, and safety practices in oil and gas laboratories.
Petroleum Fluids Analysis and PVT Testing
Explains crude oil and gas sampling, pressure-volume-temperature (PVT) testing, and laboratory analysis techniques.
Quality Control in Oil & Gas Laboratory Operations
Focuses on quality assurance, calibration, and industry-standard testing procedures for hydrocarbons and process fluids.
Corrosion Testing and Material Integrity Assessment
Covers laboratory methods for corrosion rate measurement, material selection, and failure analysis in oil and gas operations.
Environmental Laboratory Testing and Compliance
Teaches methods for monitoring pollutants, water analysis, and regulatory compliance in oil and gas laboratory settings.
Oil Refining, Petrochemicals, Fertilizers18 courses
Fundamentals of Oil Refining and Petrochemicals3
Basics of Oil Refining Technology
Provides an overview of crude oil refining, refining processes, and key petroleum products. Covers refinery configuration, product specifications, and refining economics.
Advanced Oil Refining Technology
Explores complex refining processes, process integration, and optimization strategies to improve efficiency, product yield, and profitability.
Refinery-Petrochemical Integration and Economics
Covers refinery and petrochemical synergies, value chain optimization, and economic drivers influencing refining and petrochemical industries.
Crude Oil Processing and Refining Units3
Crude Distillation Tower Operations
Explains atmospheric and vacuum distillation, crude fractionation principles, and operational challenges in refinery distillation units.
Conversion Processes in Petroleum Refineries
Covers catalytic cracking, hydrocracking, coking, and other conversion processes used to maximize valuable product yields.
Hydrotreating and Hydrocracking Process Technology
Explores sulfur and nitrogen removal, hydrogenation reactions, hydroprocessing catalysts, and refinery hydrogen management.
Storage, Handling, and Blending Operations3
Crude Oil Storage, Management, Handling, Measurement & Loss Prevention
Provides knowledge of crude oil storage tanks, inventory management, loss control, and regulatory compliance in oil terminals.
Blending Operations and Fuel Quality Management
Covers blending techniques, specifications, and quality control of refined products to meet market and environmental requirements.
Vessels and Tanks: Design and Operation
Focuses on storage tank design, pressure vessel integrity, safety, and operational best practices in oil and gas facilities.
Energy Efficiency and Optimization in Refineries3
Energy Optimization in Oil Refineries
Introduces energy-saving techniques, heat integration, and process efficiency improvement strategies to reduce refining costs.
Hydrogen Production by Steam Reforming and PSA Technology
Covers hydrogen generation, purification, and recovery methods for refinery and petrochemical hydrogen networks.
Atmospheric and Vacuum Distillation Optimization
Explores strategies for optimizing distillation efficiency, product recovery, and energy consumption in refinery operations.
Corrosion Control and Process Safety3
Corrosion in the Petroleum and Petrochemical Industry: Mitigation Techniques
Covers corrosion types, causes, and prevention strategies in refining and petrochemical facilities.
Hydroprocessing and Catalytic Reforming Technology
Focuses on catalyst selection, process optimization, and performance monitoring in refining and petrochemical plants.
Process Safety and Risk Management in Refineries
Covers hazard analysis, risk assessment, and safety measures to prevent process incidents in refining and petrochemical operations.
Fertilizer Industry and Petrochemical Processes3
Introduction to the Fertilizer Industry and Technologies
Provides an overview of fertilizer production processes, raw materials, and major products such as ammonia, urea, and phosphates.
Petrochemical Production Processes and Feedstocks
Explores key petrochemical units, including steam cracking, polymerization, and aromatics production.
Advanced Petrochemical Process Optimization
Covers process simulation, cost reduction strategies, and advanced troubleshooting techniques in petrochemical operations.
Business Management18 courses
Project and Risk Management3
EPC Project Management
Covers the full EPC project lifecycle, engineering phases, procurement planning, and construction management tools to monitor and control project performance.
Applied Project Management for Oil and Gas
Provides practical knowledge on estimating, planning, executing, and controlling oil and gas projects, with a focus on project risk and uncertainty management.
Advanced Cost Estimating and Control for Projects
Focuses on cost and schedule management, risk analysis, financial planning, and project performance monitoring for high-value oil and gas projects.
Risk and Financial Management3
Risk Management for Exploration and Production Projects
Introduces project risk identification, assessment, and response strategies in exploration and production activities.
Business Planning and Strategy Development
Covers analytical methods, strategy formulation, and competitive positioning to achieve business objectives in dynamic markets.
Petroleum Economics and Financial Decision-Making
Explores investment evaluation, fiscal regimes, and financial modeling for oil and gas project profitability assessments.
Leadership and Communication3
Management and Leadership in Oil and Gas
Develops leadership skills essential for managing oil and gas teams, emphasizing strategic thinking, motivation, and effective decision-making.
Effective Communication and Presentation Skills for Project Managers
Enhances communication techniques, report writing, and stakeholder engagement for project leadership roles.
Leadership Interaction with Stakeholders and Media
Prepares managers to effectively communicate with regulators, investors, and media representatives in the oil and gas sector.
Performance and Supply Chain Management3
Performance Management and Key Metrics
Introduces goal setting, performance tracking, and benchmarking methodologies for business optimization.
Supply Chain Strategy in Oil and Gas
Covers procurement planning, supplier evaluation, contract negotiation, and logistics management in petroleum operations.
International Oil and Gas Contracts and Negotiation
Focuses on contract structuring, risk allocation, and negotiation strategies for exploration, production, and service agreements.
Business Operations and Logistics3
Inventory and Stock Control Optimization
Provides best practices for inventory planning, warehouse management, and minimizing operational costs.
Total Logistics and Transportation Management
Explores logistics planning, supply chain integration, and efficiency improvement strategies in the oil and gas sector.
The Tendering Process and Contract Reviews
Teaches bid preparation, evaluation criteria, risk mitigation, and post-award contract management.
Finance, Auditing, and Accounting3
Mastering Finance for Non-Financial Oil and Gas Professionals
Introduces financial concepts, budgeting, and cash flow analysis for professionals without a finance background.
Exploration and Production Accounting (Level 1-3)
A structured program covering joint venture accounting, cost control, production sharing contracts, and financial reporting.
Auditing in the Oil and Gas Industry
Provides techniques for conducting internal audits, compliance reviews, and risk assessments in petroleum operations.
Health, Safety & Environment (HSE)45 courses
HSE Core Safety Training11
BOSIET – Basic Offshore Safety Induction & Emergency Training (OPITO)
Covers essential offshore safety training, including survival at sea, firefighting, emergency response, and helicopter escape training.
HUET – Helicopter Underwater Escape Training
Prepares personnel for helicopter travel over water by providing underwater escape techniques in the event of an emergency.
Confined Space Entry
Provides knowledge on confined space hazards, entry procedures, permit systems, gas testing, and emergency response.
H2S Safety & Awareness
Covers the hazards of Hydrogen Sulfide (H2S), exposure limits, detection methods, PPE, and emergency response measures.
Authorised Gas Tester (AGT)
Teaches safe atmospheric testing, gas detection, confined space monitoring, and compliance with industry safety regulations.
NEBOSH International General Certificate
A globally recognized qualification covering workplace health and safety principles, hazard identification, and risk control.
NEBOSH International Oil & Gas Certificate
Specialized for the oil and gas sector, covering process safety, hydrocarbon hazards, and risk management.
Occupational Health & Safety (General Training)
Provides fundamental HSE principles, regulations, hazard control methods, and workplace safety compliance.
Work Permit System
Covers permit-to-work procedures, risk assessment, and safe work practices for hazardous tasks.
Lockout/Tagout (LOTO)
Focuses on energy isolation procedures to prevent accidental machine start-ups during maintenance.
Emergency Response & Crisis Management
Trains personnel in emergency preparedness, evacuation planning, and crisis handling techniques.
Process & Fire Safety7
Process Safety Management (PSM)
Covers hazard identification, risk assessment, safety instrumented systems, and emergency shutdown protocols.
Fire Safety & Firefighting Techniques
Provides fire risk assessment, fire prevention, fire suppression methods, and fire extinguisher handling.
Fire Fighting Course (JOIFF)
Covers fire behavior, risk assessment, suppression techniques, and explosion prevention in oil and gas operations. Provides hands-on training in firefighting equipment, emergency response strategies, and compliance with industry safety standards.
Incident Investigation & Root Cause Analysis
Covers incident reporting, root cause determination, and corrective action implementation.
Hazardous Materials & Spill Control
Focuses on the handling, transportation, and containment of hazardous chemicals.
HAZWOPER Awareness (Hazardous Waste Operations and Emergency Response)
Trains personnel on handling hazardous substances, decontamination procedures, and emergency response.
Safety Signs & Risk Communication
Covers workplace hazard signs, color codes, and safety communication practices.
Environmental Safety & Management5
Environmental Management & Pollution Control
Covers waste management, pollution prevention, air and water quality monitoring, and regulatory compliance.
Carbon Capture and Storage Safety (CCSS)
Provides insights into CO2 storage safety, greenhouse gas impact, and risk management for CCS projects.
Risk-Based Process Safety Management
Integrates risk assessment into safety programs for process hazard control.
Chemical Handling & Hazardous Waste Management
Covers chemical safety, spill response, and hazardous waste disposal regulations.
Safety & Environmental Management in Projects
Focuses on integrating safety and environmental considerations into project planning and execution.
Industrial Safety Training6
Working at Heights & Fall Protection
Covers hazard identification, fall protection equipment, ladder and scaffold safety, and emergency rescue.
Industrial Breathing Protection & SCBA Training
Teaches proper use, maintenance, and emergency procedures for self-contained breathing apparatus (SCBA).
Machine Guarding & Equipment Safety
Covers safeguarding methods, hazard recognition, and OSHA compliance for machinery safety.
Slinging, Handling, & Mechanical Lifting Operations
Provides training on lifting operations, rigging techniques, and crane safety.
Defensive Driving & Vehicle Safety
Enhances driver awareness, risk assessment, and vehicle safety protocols in the oil & gas sector.
Transport of Hazardous Materials
Covers the safe transportation, regulatory requirements, and emergency response for hazardous goods.
Emergency Preparedness & Response5
Incident Management & Onshore Emergency Training
Focuses on managing onshore emergencies, rescue procedures, and safety drills.
Major Emergency Management Initial Response (MEMIR) – OPITO
Trains emergency response teams to handle major incidents in offshore environments.
First Aid / CPR / AED
Covers emergency medical response, CPR techniques, and automated external defibrillator (AED) use.
Basic Aviation Rescue & Firefighting (BARFF)
Prepares personnel for emergency response at aviation facilities.
Civil Aviation Authority (CAA) Offshore Safety Training
Covers offshore aviation safety procedures, emergency landing protocols, and survival techniques.
HSE Leadership & Risk Management5
IOSH Managing Safely
Provides essential HSE management skills for supervisors and managers.
Developing Safety Supervisor Skills
Covers leadership, risk communication, and regulatory compliance for safety officers.
Safety Audit & Site Inspection
Teaches how to conduct workplace safety audits, inspections, and hazard assessments.
Hazard Identification & Risk Assessment
Covers proactive safety management through risk identification and control measures.
Behavior-Based Safety (BBS)
Focuses on improving workplace safety culture through behavioral safety techniques.
Specialized Safety Programs6
Petroleum Storage Tanks Safe Cleaning
Covers tank cleaning procedures, confined space safety, and environmental compliance.
NORM (Naturally Occurring Radioactive Materials) Handling
Provides safety measures for handling radioactive materials in oil & gas facilities.
Electrical Safety & Arc Flash Protection
Covers safe work practices for electrical maintenance, grounding techniques, and arc flash hazards.
Safety in Petrol Filling Stations
Focuses on fuel handling, fire prevention, and emergency response in fuel stations.
Back Injury Prevention Program
Teaches proper lifting techniques and ergonomic practices to prevent back injuries.
Hand Injury Prevention
Covers PPE selection, hazard identification, and hand safety techniques.
Start a conversation
Tell us what your teams need to be able to do. We will come back with a scope, a timeline and a cost.